Description
- SYD Dynamics TransducerM 9-Axis AHRS / IMU w/ Dual-Port Communication (TM171)
- Precise calibrated IMU
- Roll/Pitch/Yaw/Quaternion/Raw IMU output, excellent dynamic performance
- Dual-port communication
- Configurable output rate (800Hz Maximum)
- Enhanced ESD protection
- Compact design (40 x 34 x 12.6 mm)
The SYD Dynamics TransducerM 9-Axis AHRS / IMU w/ Dual-Port Communication (TM171) is an Attitude and Heading Reference System that delivers exceptional performance in roll, pitch, and yaw measurements, along with remarkable yaw stability. This system is specifically designed to deliver maximum performance with cost efficiency and includes a calibrated Inertial Measurement Unit composed of a triad of accelerometers, gyroscopes, and magnetometers. It facilitates both Serial and USB communication and is equipped with a C/C++ communication library accompanied by example code to assist in custom parsing code development. Additionally, it features a configuration GUI for various setting adjustments and data logging, and factory calibration by 22.5 ℃ to enhance accuracy.
The TransducerM TM151/TM171 are tailored to deliver a higher cost-performance ratio for consumer-grade and entry-level industrial applications. They are calibrated to ensure reliable gyroscope and accelerometer readings. The devices support various communication methods, including Type-C direct connection and serial communication. The communication baseboard is designed with stamp holes to simplify soldering and integration into system circuit boards.
- 1x SYD Dynamics TransducerM 9-Axis AHRS / IMU w/ Dual-Port Communication (TM171)
- Attitude and Heading Reference System (AHRS) with 9-axis IMU
- 9-axis means 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer
- Enhanced Dynamic and static measure of roll, pitch and yaw measurements, Quaternion and IMU raw data output
- Serial and USB (Type-C) dual port communication, USB is running Virtual COM Port profile and appears in Linux as /dev/ttyACMx and COMx in Windows
- Configuration GUI (ImuAssistant, Windows Only) for setting and data logging
- Example Interfacing Code: C++ for Arduino / QT / Raspberry Pi Pico / ROS 1 / ROS 2 (Available on SYD Dynamics website), Communication library is in source code and can be used platform independently. C language example available. All SYD Dynamics TransducerM products share the same main communication protocol except certain specific APIs.
- Factory Calibration by 22.5°C for improved accuracy
- Communication baseboard with stamp holes for integration
- Yaw drifting: 3.0° every 25 minutes (TM151) and 2.6° every 25 minutes (TM171), typical car driving on flat city road test condition when QoS reaches 5.
- Typical dynamic Roll and Pitch error in RMS: <1.5 ° (TM151) and <1.0 ° (TM171)
- Gyroscope measurement range: ± 1000 °/s, Resolution: 0.01°/s
- Gyroscope Non-linearity: <0.3% FS TYP (TM151), <0.2% FS TYP (TM171)
- Accelerometer measurement range: ±10g
- Digital compass function.
- ESD protection on TXD and RXD port
- Adjustable UART baud rate
- Low energy consumption: 80mA at 5V
- Output rate: 800Hz (TM171 only), 400Hz, 200Hz, 100Hz, 50Hz, 25Hz, 10Hz, 5Hz, 1Hz
- Quality-of-Service (QoS) for healthiness and data quality measure